Saltar al contenido principal

¿Cómo restaurar la opción Ejecutar un script que falta en la regla de Outlook?

En determinadas versiones de Outlook, especialmente en actualizaciones recientes, la opción "Ejecutar un script" puede estar deshabilitada de forma predeterminada como medida de seguridad. Para activar la opción "Ejecutar un script" en Outlook, lo que permite la creación de reglas con scripts VBA, normalmente necesitarás modificar configuraciones de registro específicas. Continúe leyendo para obtener instrucciones detalladas sobre cómo hacer esto.

Habilite la opción que falta "Ejecutar un script" en Outlook

Para restaurar lo perdido ejecutar un script opción en el asistente de reglas de Outlook, primero asegúrese de que Outlook esté cerradoy luego continúe con los siguientes pasos:

  1. Pulse el botón Win + R llaves juntas para abrir el Ejecutar caja de diálogo. En este cuadro de diálogo, escriba regedit y luego haga clic en el OK del botón.
  2. en el estallido Control de cuentas de usuario cuadro de diálogo, haga clic en el Sí del botón.
  3. En Editor del registro ventana, navegue hasta la siguiente ruta para acceder a la Seguridad ajuste: HKEY_CURRENT_USER \ Software \ Microsoft \ Office \ 16.0 \ Outlook \ Security
  4. Haz clic derecho en la Seguridad y seleccione Nuevo > DWORD (bits 32) Valor.
  5. Nombra el DWORD creado como Habilitar reglas de correo de cliente inseguro.
  6. Haga doble clic en el Habilitar reglas de correo de cliente inseguro DWORD para abrir el Edite el valor DWORD (32-bit) caja de diálogo. Escribe 1 existentes Datos de valor caja, y haga clic OK.
  7. Reinicie su Microsoft Outlook.

Si sigue los pasos descritos anteriormente, podrá ubicar y utilizar la opción "ejecutar un script" al crear reglas en Outlook.

Artículos Relacionados

Las mejores herramientas de productividad de oficina

Kutools para Outlook - Más de 100 potentes funciones para potenciar tu perspectiva

🤖 Asistente de correo AI: Correos electrónicos profesionales instantáneos con magia de IA: respuestas geniales con un clic, tono perfecto y dominio multilingüe. ¡Transforme el correo electrónico sin esfuerzo! ...

📧 Automatización de correo electrónico: Fuera de la oficina (disponible para POP e IMAP)  /  Programar envío de correos electrónicos  /  CC/CCO automático según reglas al enviar correo electrónico  /  Reenvío automático (reglas avanzadas)   /  Agregar saludo automáticamente   /  Divida automáticamente correos electrónicos de múltiples destinatarios en mensajes individuales ...

📨 Gestión de correo electrónico: Recuperar correos electrónicos fácilmente  /  Bloquear correos electrónicos fraudulentos por sujetos y otras personas  /  Eliminar correos electrónicos duplicados  /  Búsqueda Avanzada  /  Consolidar carpetas ...

📁 Archivos adjuntos profesionales: Guardar lote  /  Separación de lotes  /  Comprimir por lotes  /  Ahorro automático   /  Desconexión automática  /  Autocompresión ...

???? Interfaz mágica: 😊Más emojis bonitos y geniales   /  Aumente su productividad en Outlook con vistas con pestañas  /  Minimizar Outlook en lugar de cerrar ...

👍 Maravillas con un clic: Responder a todos los archivos adjuntos entrantes  /   Correos electrónicos antiphishing  /  🕘Mostrar zona horaria del remitente ...

👩🏼‍🤝‍👩🏻 Contactos y calendario: Agregar por lotes contactos de correos electrónicos seleccionados  /  Dividir un grupo de contactos en grupos individuales  /  Eliminar recordatorios de cumpleaños ...

Mas de Características 100 ¡Espere su exploración! Haga clic aquí para descubrir más.

Leer Mas       Descargar gratis      Comprar
 

 

Comments (26)
No ratings yet. Be the first to rate!
Graham
Graham
This comment was minimized by the moderator on the site
You switched from 32 bit to 64 bit without explanation. See "New > DWORD (32-BIT Value)" then after "6. In the Edit QWORD (64-BIT)". Which is it ? Or is it both?
Reply
0
0
Amanda Lee
Amanda Lee     Graham
This comment was minimized by the moderator on the site
Sorry for the confusion. It should be the DWORD (32-bit) Value. And I've fixed it in the tutorial. 🙂
Reply
Report
0
0
jrlongoria@gmail.com
This comment was minimized by the moderator on the site
You change from DWORD to QWORD at the end.
It should be DWORD
Reply
Report
0
0
Amanda Lee
Amanda Lee    
This comment was minimized by the moderator on the site
Thank you for bringing this to my attention. I've made the necessary correction in the tutorial.
Reply
Report
0
0
Max
Max
This comment was minimized by the moderator on the site
Great! Thanks
Reply
0
0
Ethan H
Ethan H
This comment was minimized by the moderator on the site
This worked for me in Outlook for Office 365. Once point to clarify, the instructions flip-flop between DWORD and QWORD, which are mutually exclusive. I used DWORD and it worked.
Reply
0
0
FerretWilliams
FerretWilliams
This comment was minimized by the moderator on the site
I also didn't have a security folder. To get around the issue, I set a rule to forward all emails fitting a specific rule to IFTTT so I can use their automation instead. Won't work for everybody, and attachments get a long number added to them if saving to Dropbox.
Reply
0
0
dan
dan     FerretWilliams
This comment was minimized by the moderator on the site
what applet did you use on IFTTT, or did you make your own?
Reply
0
0
FerretWilliams
FerretWilliams     dan
This comment was minimized by the moderator on the site
I set an email trigger, and set the action to be to save to Dropbox. However, I've since switched to Microsoft Flow for saving Gmail directly to Dropbox. My specific goal was to save Gmail attachments to Dropbox, and Flow worked best for that after IFTTT dropped support for reading emails from Gmail.
Reply
0
0
Sagar
Sagar
This comment was minimized by the moderator on the site
I Don't Have a security folder after HKEY_CURRENT_USER\Software\Microsoft\Office\16.0\Outlook
Reply
0
0
IT Engineer
IT Engineer     Sagar
This comment was minimized by the moderator on the site
It's because Microsoft has yet again changed something concerning this feature. Most likely, this registry key path has completely changed, or has been outright omitted. I have a Premier Support ticket open with MS currently to have them provide us the CORRECT registry setting for Office2016/2019 current monthly channel to bring the Run a Script in Rules Actions back. It is completely unacceptable for MS to continue to alter/omit features like this without clear & priority notification to clients. I understand the security risks behind using such a feature, but in certain scenarios, this still is used.
Reply
0
0
Azza
Azza     IT Engineer
This comment was minimized by the moderator on the site
By playing around I found the correct key:
Computer\HKEY_USERS\{whichevertheuserkeyis}\Software\Microsoft\Office\16.0\Outlook\Security

So do not use HKEY_Current_User, instead use HKEY_USERS
Reply
0
0
Jason
Jason
This comment was minimized by the moderator on the site
This doesn't seem to work for Outlook 2013. Is there a method that will work for this version? Also, your instructions reference DWORD and the images imply QWORD.
Reply
0
0
Lukie
Lukie     Jason
This comment was minimized by the moderator on the site
For 2013 I used HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\Security and DWORD EnableUnsafeClientMailRules with value 1.
Each version of office has its own folder in "HKEY_CURRENT_USER\Software\Microsoft\Office\"

You also need to allow the macro to run in outlook 2013:

File -> Options -> Trust Centre -> Trust centre settings
-> Macro settings -> "Notifications for all macros"

This will ask you to allow the macro the first time the rule runs, but be careful not to allow any other unknown macros during day to day use. You could also use a digitally signed macro, and only allow digitally signed ones to run.

Then create your script, create a rule that runs it, and you should be set.
Reply
0
0
Marine
Marine     Lukie
This comment was minimized by the moderator on the site
Did not work for me.  I have Outlook 2013, but maybe now that Office 365 has overstepped this setting somehow.  I have the trust settings enabled to notify for all Macros.
Reply
0
0
Espen
Espen
This comment was minimized by the moderator on the site
DWORD or QWORD? A bit confusing to understand which to use... Had to create DWORD to make it work. Thanks
Reply
0
0
Rafal
Rafal
This comment was minimized by the moderator on the site
Do You have instructions how to enable this option also for outlook 2010?
Reply
0
0
abhi
abhi
This comment was minimized by the moderator on the site
Thank You! It worked for me and as mentioned in one of the comments below, Step 6 was DWORD dialogue box for me.
Reply
0
0
There are no comments posted here yet
Load More
Please leave your comments in English
Guest
Posting as Guest
×
Rate this post:
Reset
0   Characters
Suggested Locations